NTN 2220 Self Aligning Ball Bearings - Cylindrical Bore

SKU: NTN 2220

$164.61

الشحن محسوبة عند السداد

متوفر في الوقت الحاضر!

NTN 2220

Self Aligning Ball Bearings - Cylindrical Bore







SPECIFICATIONS


Bore Type Cylindrical
Bore Diameter 100.000 mm, 3.9370 in
Outside Diameter 180.000 mm, 7.0866 in
Overall Width 1.8110 in, 46.000 mm
Closure Type Open
Cage Type Pressed
Internal Clearance CN
Operating Temperature Range -40 to 250 ºF
Seal Material None
Dynamic Load Capacity 21200 lbf
Seal Type None
Static Load Capacity 8650 lbf
Precision Rating Class 0
Maximum RPM 3800 rpm
Bearing Material High Carbon Chrome Steel
Cage Material Steel
Outer Ring Width 1.8110 in; 46.000 mm
Inner Ring Width 1.8110 in, 46.000 mm
Fillet Radius 0.0827 in, 2.100 mm
Weight 10.249 lb





1. Design features and characteristics

The outer ring raceway of self-aligning ball bearings forms a spherical surface whose center is common to the bearing center. The inner ring of the bearing has two raceways.
The balls, cage, and inner ring of these bearings are capable of shifting in order to compensate for a certain degree of misalignment with the outer rings. As a result, the bearing is able to align itself and compensate for shaft / housing finishing unevenness, bearing fitting error, and other sources of misalignment as shown in Fig. 1.
Since axial load capacity is limited, self- aligning ball bearing are not suitable for applications with heavy axial loads.

It is recommended to use an adapter on a self-aligning ball bearing with a tapered bore inner diameter for ease of installation and disassembly. These bearings and adapters are often used on drive shaft applications.

 

2. Standard cage type


All bearing series are equipped with a pressed cage, except 2321S and 2322S, which are equipped with a machined cage.
Self-Aligning Ball Bearings
It is recommended to use an adapter on a self-aligning ball bearing with a tapered bore inner diameter for ease of installation and disassembly. These bearings and adapters are often used on drive shaft applications.

Table 1 Standard cage types of spherical ball bearings

 




 

3. Ball protrusion


Bearings with part numbers listed in Table 2 below have balls which protrude slightly from the bearing face as illustrated in Fig. 2. The total width dimensions are shown in Table 2.

4.  Allowable misalignment angle

The allowable misalignment angle can be determined by the following function. This degree of allowable misalignment may be limited by the design of mating components around the bearing.
Normal load ....................... 1/15

 

5.  Precautions for using self-aligning ball bearings

Self-aligning ball bearings are unable to support large axial loads and therefore axial loading shall be limited.
Please consider using self-aligning roller bearings when a large axial load is to be applied.