NTN 22356EMKD1C3 Spherical Roller Bearing D=280mm

SKU: NTN 22356EMKD1C3

$5,947.46

الشحن محسوبة عند السداد

متوفر في الوقت الحاضر!

NTN 22356EMKD1C3 Spherical Roller Bearing D=280mm

SPECIFICATIONS

TECHNICAL CHARACTERISTICS

d - Inside diameter 280mm
D - Outside diameter 580mm
B - Bearing or inner ring width 175mm
d2 - Inner ring outer diameter 0mm
D1 - Inner diameter outer ring 489mm
rs - Minimum connection radius 6mm
Number of lubrication holes 8
b - Slot width 27mm
k - Hole diameter 16mm
Associated sleeve reference H2356H
Radial Game Class C3
Weight 223kg
Brand NTN




1. Design features and characteristics

Spherical roller bearings consist of an outer ring having a continuous spherical raceway and two rows of barrel-shaped rollers guided by an inner ring with two raceways. (Refer to Fig. 1) This bearing has self-aligning properties, and therefore is suited for use where misalignment between the inner and outer rings occurs from housing installation error or shaft bending.
Spherical roller bearings have a large capacity for radial loads, axial loads in either direction, and combined loads. They are also suited for applications where vibration and shock loads are encountered. When spherical roller bearings are used with a vertical shaft or under a large axial load, the load on the rollers of the row that is not subject to the axial load becomes small, and the resulting skidding on the rollers may result in wear. If the ratio of the axial load to the radial load exceeds the factor e in the dimension table (Fa/Fr > e), consult NTN Engineering.
In addition to spherical roller bearings with cylindrical bores, spherical roller bearings with tapered bores are also available. Bearings with tapered bores are specified by the suffix “K” at the end of the spherical roller bearing part number. The standard taper ratio is 1:12 for bearings with a “K” suffix; for bearings in series 240 and 241, the suffix “K30” indicates the taper ratio for a bearing is 1:30. Most tapered bore bearings incorporate the use of adapters and withdrawal sleeves for shaft mounting.