OVERVIEW
- Auto switch mounting position can be moved anywhere
- Direct installation possible
- Connection port location: body side, axial direction selectable
(body side only when switch and angle adjuster are attached) - Low pressure operation: 0.2MPa (size 10) 0.15MPa (Size 15 to 40)
- Can be adjusted to any angle with angle adjuster
- With auto switch (CDRB2 series: CDRB2?¬W, CDRB2?¬WU)
Configuration Options
1 | With auto switch | (With auto switch unit and built-in magnet) * Refer to page 99 when the auto switch unit is needed separately | |
2 | Mounting | B | Basic type |
F | Flange type | ||
3 | Shaft type | W | Single flat* |
J** | Round shaf | ||
4 | With angle adjuster unit | Refer to page 99 when the angle adjuster unit is needed separately. | |
5 | Size | 10,15,20,30,40 | |
6 | Rotating Angle | Single vane | 90,180,270 |
Double vane | 90,100 | ||
7 | Vane Type | S | Single vane |
D | Double vane | ||
8 | Auto switch | Nil | Without auto switch (Built-in magnet) |
M | Without M9 type auto switch (Built-in magnet) | ||
9 | Electrical entry/Lead wire length | Nil | Grommet/Lead wire: 0.5 m |
M | Grommet/Lead wire: 1 m | ||
L | Grommet/Lead wire: 3 m | ||
CN | Connector/Without lead wire | ||
C | Connector/Lead wire: 0.5 m | ||
CL | Connector/Lead wire: 3 m | ||
10 | Number of auto switches | S | 1 pc.* |
Nil | 2 pcs.** | ||
11 | Made to Order |