NTN 7214BDB Angular Contact Bearing - D=70



Shipping calculated at checkout

Available Now!

NTN 7214BDB Angular Contact Bearing - D=70

The values in the “Width (mm)” section of product specification are per-row (single-row) width even when a double-row combination product is selected (B Dimension in catalog).Please be aware that the overall width for double-row products is twice as wide (2B) as those indicated dimensions.


    Type Angular Contact Ball Bearing (Double Row) Inner/Outer Ring Material [Steel] Steel
    Bearing Style Double Shielded Outer Ring Shape Flat
    Precision Grade 0 I.D.(Ø) 70
    O.D.(Ø) 125 Width(mm) 24
    Basic Dynamic Load Rating(N) 69000 Max. Allowed rpm(rpm) -
    Specifications, Environment Standard / For high Speed Load Direction Radial
    Outer Ring With Outer Ring Size Standards Metric System
    Rolling Element Material [Steel] Steel Combination of Angular Contact Ball Bearings -
    Retainer Type Resin Forming Basic Load Rating, Static Rating(N) -
    Clearance sign No Preload No
    Contact angle(Degree) 40 Holder Symbol No
    Symbol of Bearing Ring Shape No Seal, Shield Symbols No
    Precision Grade Symbol No Symbol of contact angle B
    Combination symbol DB Preload Mark No
    Special Configurations Code No Bearing type symbol No
    Type symbol No Material Symbol No
    Spacer, Sleeve symbol No RoHS 10


    Angular Contact Ball Bearings

    1. Design features and characteristics

    1.1  Angular contact ball bearing

    Angular contact ball bearings are non-separable bearings with a defined contact angle in the radial direction relative to the straight line that runs through the point where each ball makes contact with the inner and outer rings (see Fig. 1). Table 1 provides information on contact angles and their designated codes.

    In addition to radial loads, angular contact ball bearings can accommodate single direction axial loads. Since an axial load is generated from a radial force, these bearings are generally used in pairs. Table 2 shows general angular contact ball bearing characteristics, Table 3 shows information on using duplex (side by side) angular contact ball bearings, and Table 4 shows information on multiple-row angular contact ball bearings.

    For bearings with a contact angle of 15° and bearing tolerance JIS Class 5 or higher, see special catalog “Precision rolling bearings (CAT. No. 2260/E)”.



    1.2  Four-point angular contact ball bearings

    Four-point angular contact ball bearings have a contact angle of 30° and a split inner ring. As shown in Fig. 2, when the inner and outer rings receive a radial load, the ball contacts the inner and outer rings at four points. This construction enables a single bearing to accommodate axial loads from either direction, and when under a simple axial load or heavy axial load, the bearing relies on two contact points like ordinary bearings.


    1.3  Double row angular contact ball bearings

    The structure of double row angular contact ball bearings is designed by arranging two single row angular contact bearings back-to-back in duplex (DB) to form a single bearing with a contact angle of 25°.
    These bearings are capable of accommodating radial loads, axial loads in either direction, and have a high capacity for moment loads.
    As shown in Fig. 4, sealed and shielded type double row angular contact ball bearings are also available. Standard loads vary from those of open type bearings.